http://rtc.stagcms.com/reading-economic-geography.php At the hardware level of your network card, though, your network card is only looking at other MAC addresses for interfaces on the same network. Bear in mind that each network interface has its own MAC address. So, on a typical laptop with both a Wi-Fi radio and a wired Ethernet port, the wireless and wired network interface each have their own unique MAC addresses. Most network cards allow you to set a custom MAC address from their configuration panes in the Device Manager, although some network drivers may not support this feature.
First, open the Device Manager.
You can also do this the old-fashioned way. This involves taking the network interface down, running a command to change its MAC address, and then bringing it back up. For that, you need the Terminal.
As on Linux, this change is temporary and will be reset when you next reboot. You can verify your change took effect by running a command that shows your network connection details and checking what MAC address your network interface reports afterwards. The Best Tech Newsletter Anywhere.
Method 1. Open the Device Manager. You can access the Device Manager from the Control Panel. It will be located in the System and Security section if you are using Category View. Expand the Network Adapters section.
In your Device Manager, you will see a list of all of the hardware installed on your computer. These are sorted into categories. Expand the Network Adapters section to see all of your installed network adapters.
If you are not sure which adapter you are using, see Step 1 of the second method to find your device's Description. Right-click on your adapter. Select Properties from the menu to open the network adapter's Properties window. Click the Advanced tab.
You can change the MAC address for the network card in Windows If you are using Windows Vista, Windows 7 or higher, you have to go to. Applications that change MAC addresses with Windows XP and Vista no longer work. Do you know of any applications or finally functionality in.
Highlight it and you will see a "Value" field on the right. Click the radio button to enable the "Value" field. Not all adapters can be changed this way. If you can't find either of these entries, you will need to use one of the other methods in this article. Enter your new MAC address. MAC addresses are digit values, and should be entered without any dashes or colons.
For example, if you want to make the MAC address "2A: Reboot your computer to enable the changes. You can also disable and re-enable your adapter within Windows for the change to become effective without rebooting.
Check that the changes took effect. It should be your new MAC address. Method 2. Find your network adapter's ID information.
In order to easily identify your network adapter in the Windows Registry, you'll want to gather some basic information about it through the Command Prompt. Note the Description and Physical Address for the active network device.
Sunday, June 7, Please enter your comment! Proposed as answer by Begti Sunday, January 30, It should be your new MAC address. In Windows 7, you may see a warning message window if the new MAC address of wireless adapter is not an available value.
Ignore devices that aren't active Media Disconnected. Type net config rdr and press Enter. Open the Registry Editor. This will open the Registry Editor, which will allow you to change the settings for your network card. Making incorrect changes to the registry can cause your system to malfunction. Navigate to the registry key.
Expand it by clicking the arrow. Find your adapter.
There will be several folders labeled "", "", etc. Open each of these and compare the DriverDesc field to the Description you noted in the first step. Right-click on the folder that matches your device. For example, if the "" folder matches your device, right-click on the folder. Name the new value "NetworkAddress". Double-click the new Network Address entry. In the "Value data" field, enter your new MAC address.
Ensure that the MAC address is formatted properly. Some adapters especially Wi-Fi cards are unforgiving of MAC addresses changes if the first octet's 2nd half isn't a 2,6,A,E or begins with a zero.